
Oakland Park & Fort Lauderdale · Florida licensed, MRSR2307
Mold Remediation in Fort Lauderdale
Licensed and IICRC S520 certified, on site in 60 minutes. Independent clearance testing on every job, so you get third-party proof the mold is gone.
Call (954) 776-1717 Not an emergency? Request a free inspection →Licensed Mold Remediation in Fort Lauderdale
Mold in Fort Lauderdale is a water problem before it is a mold problem. In our humidity, growth can begin within 24 to 48 hours of water exposure, and it hides behind walls, under flooring and inside HVAC systems where you will not see it.
Tri-County is a Florida licensed mold remediator, MRSR2307, which you can verify in about 30 seconds at MyFloridaLicense.com. All remediation is performed to the IICRC S520 standard, and our owner is a Certified Infrared Thermographer, so we locate hidden moisture with thermal imaging and moisture meters instead of opening walls to go looking for it.
Every job includes a free on-site assessment, a formal written proposal, and independent post-remediation verification so you get third-party proof the work is finished.
Free Damage Assessment and Estimate
Tell us what happened. We respond 24/7, and there is no charge for the assessment.
Why Choose Tri-County All Restorations?
Why Fort Lauderdale Properties Grow Mold
Mold is not random. In Broward County it follows the building stock and the water table, and after thirty years here we can usually name the cause before we arrive. These are the six patterns we see most often in Fort Lauderdale.
Waterfront and canal homes
Las Olas Isles, Rio Vista, Seven Isles and Harbor Beach sit on a high water table with seawalls holding back brackish water. Salt air corrodes AC coils and condensate lines, and a blocked condensate line is one of the most common mold calls we take on the isles.
Homes built before 1978
Victoria Park, Sailboat Bend and Colee Hammock are full of plaster over wood lath, no vapor barrier, and original windows that sweat in summer. We hold EPA Lead Renovator certification, RI 19139-11-01610, which is required to disturb painted surfaces in a pre-1978 home. Most mold companies have to subcontract that.
Concrete block and stucco
The dominant construction across Broward. Moisture wicks through block and condenses on the inside face of exterior walls, so mold appears along a wall with no leak anywhere near it. Owners often assume a roof problem. It is usually the wall itself.
Beach condos and mid-rises
Along Galt Ocean Mile and Coral Ridge, shared chase risers move moisture between units, so the source is frequently not in the unit reporting the problem. AC condensate overflow is the single most common trigger we find.
Seasonal and closed-up homes
A house shut up from May through November with the thermostat set high is the classic South Florida mold job. The AC runs too little to pull humidity out, and owners return in season to a problem that has had five months to establish itself.
Hurricane season and king tides
June through November brings wind-driven rain into wall assemblies, and the autumn king tides now push water into streets in Las Olas and Victoria Park. Both leave moisture inside the structure long after the visible water is gone.
Our Mold Services in Fort Lauderdale
Mold Inspection & Assessment
We identify visible and hidden mold growth using specialized tools to trace moisture sources and map contamination.
- Visual mold inspections
- Moisture mapping and leak tracing
- Pre-remediation assessments
Mold Removal
Our technicians follow industry standards to remove contaminated materials and treat affected areas safely.
- Black mold removal
- Bathroom and attic mold
- Drywall and insulation disposal
Mold Remediation
We contain, clean, and restore affected areas to ensure a safe, mold-free environment.
- Containment with negative air pressure
- HEPA vacuuming and antimicrobial treatment
- Mold prevention and air filtration
Moisture Control & Leak Detection
Stopping mold starts with moisture control. We find and fix the source of the issue to prevent recurrence.
- Infrared thermal imaging
- Crawl space and HVAC moisture monitoring
- Roof, plumbing, and foundation leak detection
Odor Removal & Air Scrubbing
We use commercial-grade air scrubbers and deodorizers to eliminate lingering mold odors and airborne spores.
- HEPA filtration
- Hydroxyl and ozone treatment
- Sanitization for improved indoor air quality
- Duct and HVAC cleaning (optional)
Mold Prevention
Proactive solutions reduce the risk of future outbreaks.
- Post-storm moisture checks
- Dehumidifier recommendations
- Leak-proofing and improved ventilation
Finding Mold Without Tearing Your Walls Open
The question we get asked most is how much of the wall has to come out. The answer depends on how well we can find the moisture before we start cutting.
Our owner is a Certified Infrared Thermographer. Anyone can buy a thermal camera. Reading one correctly, and knowing the difference between a cold spot and a wet spot, is a trained skill. Paired with moisture meters and air quality testing, it lets us map the moisture behind a wall before deciding what has to be opened.
That usually means a smaller demolition scope, a faster job, and a smaller claim. It also means we can show you what we found rather than asking you to take our word for it.


Neighborhoods We Cover in Fort Lauderdale
We remediate mold across Fort Lauderdale and the surrounding Broward communities, including Las Olas, Victoria Park, Rio Vista, Coral Ridge, Harbor Beach, Seven Isles, Idlewyld, Sailboat Bend, Colee Hammock, Flagler Village, Tarpon River and Imperial Point.
Our crews are based in Oakland Park, minutes from Fort Lauderdale, which is how we reach most of Broward within the hour.
How Do You Know the Mold Is Actually Gone?
Because we do not grade our own work. Once remediation is complete, an independent third party performs post-remediation verification and clearance testing. You receive their results, not ours.
That matters because the company that did the work should never be the only one confirming it worked. If clearance fails, we go back in. You do not pay twice.
What To Do If You Find Mold on Your Property
Prompt removal and treatment to prevent mold can save you money and protect your family from several serious health hazards. Completely abating mold is a more difficult task than you most people are aware. We highly recommend using the services of a qualified team of mold removal specialists, like Tri-County All Restorations.
If you experience mold growth on your property, it’s important to take these steps:
Call a professional mold removal company for an inspection and remediation.
Avoid touching or disturbing the mold.
Identify and address the source of moisture.
Follow any recommendations from the mold removal company to prevent future growth.
★★★★★
Tri-County All Restorations did an outstanding job from start to finish remediating a mold infestation in my father's condo. They arrived promptly, assessed the damage thoroughly, and worked efficiently to restore everything back to its original condition, or better.
Communication was excellent throughout, and Kim and Gary made sure I understood each step of the process. I was sent pictures and videos throughout. I highly recommend Tri-County All Restorations to anyone in need of reliable and professional mold remediation services.
What Mold Remediation Costs, and Who Pays
Most mold remediation in Fort Lauderdale is paid through a property insurance claim. We hold preferred contractor status with CodeBlue, Nexus and Direct Claims Management, the claims management companies that between them work with more than 40 carriers, and we bill the carrier directly.
Every job starts with a free assessment and a formal written proposal, so you know the scope and the number before any work begins.
Preferred Contractor With Three Claims Companies
Preferred contractor status with CodeBlue, Nexus and Direct Claims Management, covering more than 40 insurance carriers.
We bill your carrier directly, work with the adjuster, and document the job with photographs and video throughout so the claim is supported.
Free Assessment and a Written Proposal
No hidden fees and no pressure. Every mold job includes a free on-site assessment, a formal written proposal before work starts, and a scope you can hand to your adjuster.
Emergency Mold Response, 24/7
Day or night, we’re ready to help. No matter when disaster strikes, our team is available 24/7 to restore your home or business.
Licensed, and You Can Check
Florida requires a state license to remediate mold. Most homeowners do not know that, and it is the fastest way to tell a real remediator from a general contractor with a fan. Ours is below. Verify it yourself at MyFloridaLicense.com.

You are more than a customer to me. You are my neighbor.
Gary Ackel
Owner, Tri-County All Restorations. Born and raised in Fort Lauderdale, and the licensed mold remediator on every job we run.
Questions Fort Lauderdale Homeowners Ask About Mold
The answers below are the ones we give on the phone every week. If your question is not here, call and ask. There is no charge for a straight answer.
Usually only when the mold came from a sudden, accidental water event that is itself covered, such as a burst supply line or a storm opening in the roof. Most Florida policies cap mold remediation somewhere between $10,000 and $50,000, and most exclude mold caused by long-term humidity or a leak you already knew about. We document the moisture source with readings and photographs on the first visit, so the cause is on record before anyone disputes it.
Yes, and most homeowners do not know it. Florida requires a state mold remediator license to perform this work. Ours is MRSR2307, valid through July 2028, and you can verify it yourself at MyFloridaLicense.com. A general contractor with a fan and a bottle of bleach is not licensed to remediate mold, and unlicensed work can complicate your claim later.
Because we do not grade our own work. Once remediation is complete, an independent third party performs post-remediation verification and clearance testing, and you receive their results rather than ours. If clearance fails, we go back in. You do not pay twice.
Usually not. We build containment and run the work area under negative air pressure, so spores are pulled out of the house rather than pushed through it. Moving out becomes sensible when the work area includes your only kitchen or bathroom, or when someone in the home has asthma, a respiratory condition, or a compromised immune system.
Almost always because the water source was never corrected. In Fort Lauderdale the usual causes are a leaking AC condensate line, a slab leak fed by the high water table, and block or stucco walls that stay damp after wind-driven rain. Removing visible mold without fixing the moisture buys a few months at most.
A single bathroom or closet is often one to two days. A whole floor after a water loss is more like three to five days, plus drying time before clearance testing can be scheduled. No one can give you an honest number before moisture mapping is done, and that is part of the free assessment.
Keep people out of the affected room and leave it closed off if you can. Do not disturb the growth, do not point a fan at it, do not run the air handler, and do not spray it with bleach. Each of those moves spores into the rest of the house and makes the job bigger than it needed to be.
Beyond Just Removing the Mold
Water Damage Restoration
Storm & Wind Damage Repair
Fire & Smoke Damage Repair
Home / Fort Lauderdale Restoration Services / Mold Damage
